SELVA MARINE ANTIBES 15XS S505XS, Руководство пользователя

Страница: 13 / 47

12
CONTROL FUNCTIONS
Gear-shift lever.
Starting out from the position of neutral gear ( N ), move the lever in boat
direction and you engage the forward gear.
Moving it in the opposite direction, you engages the reverse gear ( R ).
Picture No. 18.
Push-button to stop the motor.(Model with manual start)
Pressing the stop button (red) the ignition circuit is broken and the engine
stops immediately. Picture No. 19.
Choke.
This control supplies a rich mixture required to start the cold engine.
Picture No. 20.
Fuel joint
Connecting the fast fuel joint, you connect the fuel hose to the fuel tank.
Picture No. 21.
Recoil starter handle. (Model with manual start)
Pulling this handle, you start the engine.
Picture No. 22
Engine stop switch. (Model with manual start)
Button to stop the engine in an emergency.
Picture No. 23
Throttle-control adjustment. (Model with manual start)
Device which permit to have a constant speed.
Picture No. 24.
Accelerator-grip/steering-handle. (Model with manual start)
Turn the grip to operate the accelerator, and move it sideways to adjust
the steering angle. Picture No. 25.
Cowling lock lever.
Moving this two levers upwards locks the top cowling. To remove the top
cowling push the cowling lock levers downwards. Picture No. 26.
Free-lock lever.
This mechanism is used to prevent reverse thrust from the propeller lifting
the outboard motor when reversing. It is used also to release the lift- motor
cam when you want to put the motor in cruising position from the lift
position.
Picture No. 27.
Clamp-screws.
Use them to clamp the outboard motor on the transom.
Picture No. 28.
Steering adjustment grip.
With it you can adjust the resistance to steering movement. Screw it to
increase resistance. Picture No. 29.
Trim angle adjusting-rod.
It can be positioned in different holes in order to obtain the appropriate trim
angle.
Picture No. 30
https://www.boat-manuals.com/