Selmo SMART 43 Скачать руководство пользователя страница 1

 

 

  

Selmo

 

Comfort technology division

“SMART 43 ”

Electronic control for towel radiators

 

'SMART 43 ' 

is an electronic control for 

towel radiators. 

 

There are ten different types of available 
resistances: from 100W to 1000W.

 

Operational modes:

 

Continuous-Heating, Stand-by, 
Boost, Timer12, Timer24.

 

• “Continuous-Heating”:

the electronic 

control activates the heating element and 
remains active until the user decides to set 
the device in “Stand-by” mode. The maximum 
temperature of  work is 43°C 

 

• “Boost” mode: 

the thermostat feeds the 

heating element at the maximal power for 
two hours. At the end of the two hours, the 
control goes back into the “Stand-by” 
mode. The temperature of work is 43°C 

• “Timer12” and “Timer 24” mode: 

the

electronic control activates the “Boost” 
function for two hours. At the end of the two 
hours the control enters into “Stand-by” 
mode for either 10 or 22 hours (the user 
has the possibility to preset it), after which 
the thermostat repeats the function “Boost” 
for two hours. This sequence is repeated 
cyclically.  

• “Stand-by” mode

:   by activating this 

function, the device goes in stand-by, the 
heating element is deactivated. 

SMART 43 is a certified product:  

 

Available colours: - White

- Chromed

 

SMART 43 complies to the following directives: 

-Eco-design Directive for Energy-using Products, 2005/32/EC  (<0,5W).

 

   -EN 60335-1:2012+A11:2014  

-EN 60335-2-43:2003+A1:2006+A2:2008 
-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008 
-EN 55014-1:2006+A1:2009+A2:2011  -EN 55014-2:1997+A1:2001+A2:2008 

Rev. 4 October 2015

EN

Selmo 

Electronic

 

Viia Pacinotti, 24 - 35030 Rubano 

(PD) Italy- Tel +39 049.8976761, 

Fax +39 049.8976085

 - 

www.selmo.it

 

 

 

Содержание SMART 43








Отзывы: