SP LINK | Using SP LINK
Doc #OI0003 Part #004122 Rev 04 2010
|
59
The first setting determines how you will use your inverter.
By clicking on a drop down trigger you can select the setting you wish.
You will have noted that every time you change a setting the title of that
setting becomes highlighted in yellow. This is to remind you that you have
changed this setting. This highlight disappears when you perform the
next step – programming your inverter.
• Off Grid for remote area homes
• Mobile for Motorhomes, Caravans & Boats
• On Grid where you wish to feed Solar, Wind or Hydro power to the
electricity grid. Use this setting if back up power required in case of
grid failure
The rest are just as easy.
These two battery types require different charging parameters. Picking
one type automatically programs the inverter with a number of charge
settings.
If you are unsure of the battery type you own it is best to ask
your battery supplier.
With AC Source Power you can program the size of your generator. With
the right hand drop down menu you can choose to set the power level
in either kW or kVA depending on how your generator is rated. If you
are unsure of your generators power rating you should check with your
generator supplier.
State of Charge (SoC) control gives you the option of controlling your
system with either a calculated state of charge or by the battery voltage.
Changing Settings in Quick Start
