Version 2: September 2004 © 2004 Selecon New Zealand Limited All Rights Reserved
1200 HIGH PERFORMANCE & COMPACT
FRESNELs AND PCs
OPERATION MANUAL
THANK YOU FOR PURCHASING A SELECON LUMINAIRE. WE HAVE
DESIGNED THIS LUMINAIRE TO PROVIDE YOU WITH A SUPERIOR
FITTING IN PERFORMANCE, DESIGN AND ENGINEERING.
WE ARE CONFIDENT THAT IT WILL PERFORM TO YOUR
EXPECTATIONS FOR MANY YEARS TO COME.
Before operating your new luminaire please read this information to assist
you in making maximum use of your luminaire, its maintenance and care.
If you would like further assistance contact your Selecon dealer or
Selecon.
LAMPING YOUR LUMINAIRE
Before lamping – DISCONNECT THE LUMINAIRE FROM THE POWER SUPPLY. Be aware also that the
lamp or luminaire may still be hot, so exercise the necessary caution to avoid burns. Please note also
that these luminaires are not suitable for mounting on a normally flammable surface.
The Selecon 1200W Fresnel and PC range comprises four models: the
High Performance Fresnel, High
Performance PC, Compact Fresnel and Compact PC
. The Selecon 1200 range is designed for use with
either the T/29 1200W or T/19 1000W lamp.
To facilitate the use of these two lamps which are of different sizes the height of the GX9.5 lampbase is
adjustable. The adjustment is by means of two machined mounting posts. In the lower position the base is
aligned for use with the T/29 1200W lamp. In the top slot the base is aligned for use with the 1000W lamp.
To make the adjustment, loosen the front mounting post with a screwdriver, slide it forward to free the lamp
base. Position the base in the top (1000W) or bottom (1200W) slot, push the post back home and tighten the
screw post.
Lamps able to be used in the 1000/1200 range are: 1200W – T/29: 1000W – T/11, T/19, CP24, CP70.
♦
Release the clip fastener and swing down the rear door.
♦
Insert lamp taking care not to touch the quartz envelope with your fingers.
♦
Close door and lock off the fastener.
The luminaire should be at least 1m away from the nearest object it is
lighting.
IMPORTANT NOTE:
Before
discarding the packaging
ensure you have the
suspension bolt set, colour
frame & /or the lamp.
