Version 4: December 2008 © 2008 Selecon New Zealand Limited All Rights Reserved
1
ACCLAIM
FRESNEL
& PC
IMPORTANT NOTE:
Before discarding the
packaging, please ensure
you have the suspension
bolt set, colour frame and /or
the lamp. The packaging is
recyclable, please dispose
of it responsibly.
OPERATION MANUAL
Etl Listing
Pending
THANK YOU FOR PURCHASING A SELECON ACCLAIM LENS LUMINAIRE. SELECON HAS DESIGNED
THIS LUMINAIRE TO PROVIDE YOU WITH A SUPERIOR FITTING IN PERFORMANCE, DESIGN AND
ENGINEERING AND WE ARE CONFIDENT THAT IT WILL PERFORM TO YOUR EXPECTATIONS FOR
MANY YEARS TO COME.
Unpack and check your luminaire to ensure it has been received in good order. If the luminaire is damaged,
do not install and contact your dealer
.
This manual will provide you with information to assist you in making maximum use of your luminaire, its
maintenance and care. If you would like further assistance please contact your Selecon dealer or Selecon.
Caution!
Installation is entirely at your risk. Read this manual from cover to cover before attempting
installation. Do not attempt installation unless you are suitably qualified. If you do not understand a
point in this manual, don’t guess. Don’t take short cuts. If in doubt, stop! Contact Selecon or one of
its authorised distributors for advice. Don’t be afraid to ask for help.
Handling Notice:
The innovative use of new thermoplastic materials for the new model Acclaim Fresnel and PC front and rear isolates the
considerable heat generated by the lamp away from those areas which are used when focusing, which has to be done
when the luminaire is on. This means that the focus knob, rear grab handle and accessories slot can be handled without
the use of gloves.
However, the original Acclaim Fresnel and PC CANNOT BE HANDLED AT ALL when the
luminaire is on without the use of gloves.
The new model Acclaims are instantly identified by the integrated safety bond design feature however if in any doubt at all
–
PLEASE USE GLOVES TO AVOID POSSIBLE BURNS.
