background image

 

Shutter System: 

 
The shutters are used to mask a portion of the beam shaping it, masking light off scenery, curtains, etc. Your Acclaim 
profile features an off-centre shutter blade system developed by Selecon. The larger section of the unequal blade can be 
moved significantly around the axis of the beam providing a very wide range of masking angles. 
 
Remember the optical system inverts all images at the gate, i.e. the top shutter on the luminaire masks the bottom part of 
the light beam. 
 
 

Pattern Projection: 

 
The rotatable pattern holder comprises the holder and a spring clip to hold the pattern flat against the holder. The holder 
can be rotated in the slot to align the image as required on the stage. 

NOTE:

 The Acclaim range uses ‘M’ size patterns, with an image diameter of 50mm / 2”. 

The accessory mounting slot will also house - 

 

An adjustable Iris 

 

A motorised pattern holder eg: Rosco/ DHA RTR008 

 

To mount the accessory in the aperture slot ensure the pattern spring clip is facing to the 
front of the luminaire and slide into the slots formed as part of the shutter plates. 
 

NOTE: Do not run the luminaire with all the shutters closed, as this may cause the luminaire to over-heat. 

 
 

Interchangeable Lens Trays: 

 
The variable lens tray assemblies are interchangeable so you can change an 18º-34º luminaire to 
a 24º-44º. 
Open the tray, with the tray hanging down, lift up and out to free the hinge. 

 
 

Cleaning: 

 

Reflector - wipe with a soft cloth to remove accumulated dust. 
Lens - the assembly can be removed out of the luminaire, clean with a soft cloth. To remove baked on dust use a window 
cleaner. 
 
 

Accessories: 

 
Suspension Hookclamp (Order Code 20HC)   

 

 

Half Coupler 

Mega 

Clamp 

      Lens 

Safety 

Mesh 

(Order 

Code 

15ACSM) 

Rotatable pattern holder (Order Code 15ACGH) 

 

 

Adjustable Iris (Order Code 15ACIRIS) 

18º-34º lens tray (Order Code 15ACLTS)  

 

 

 

24º-44º lens tray (Order Code 15ACLTW) 

Colour Frame – each luminaire is supplied with a 125mm (4 7/8 inch) square colour filter holder. Additional colour frames 
are available (Order Code 20CFMF) 

 

 

Safety and Maintenance: 

 
Selecon has manufactured this luminaire in accordance with recognised best practices to recommended international 
safety standards. It is your responsibility to maintain this luminaire in good and safe working condition. 

 

Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with cracked lens, damaged 
cable, etc. Consult your Selecon distributor for assistance. Only replace with damaged parts with authorised Selecon 
spares. 

N.B.

 Luminaire cables – your Selecon luminaire is fitted with special heat resistant flexible cable, replace with genuine 

Selecon spare part cable kit only – refer to your Selecon distributor. (Replacement cables are supplied complete with 
necessary terminal connectors). 
 
Cable conductor colour codes:  

  

 

ONLY FIT A PLUG IF YOU ARE A SUITABLY 
QUALIFIED TECHNICIAN 

Version 4: December 2008 

 

5

Отзывы: