Sekonic SR-3500, Руководство по эксплуатации, Страница: 107 / 130

- 106 -
Setting menu Setting item Setting value
Operation Mode
SR-3500 mode , SR-600 mode
SR-6500 mode , SR-9000 mode
*1 *2
Setting of
Interface
Device ID 0 - 126 O ×
Baud Rate 9600 , 19200 , 38400 , 57600 , 115200 × O
Character Bit Length 7 , 8 × O
Parity None, Odd , Even × O
Stop Bit 1 , 2 × O
Flow Control RS/CS , Xon/Xoff, None × O
Character Code Accept All , Ignore 4 Codes × O
Setting of
Reading
Setting of Column 1 - ( maximum ) Columns *3 O O
Reading Method
Control fore , Control back,
Direct , FACOM, Mark to mark
Mark to mark
*5
O O
Magni fi cation
(display onlywhen timing control
types are selected)
1 - 3 - 9 times (for top-end timing control)
2 - 3 - 9 times (for bottom-end timing control)
O O
Min. Density Level 1 - 4 - 16 × O
Density Balance 1 - 15 × O
Reading Side
(only when back-sided reading
unit is installed)
Single Side , Double Side O O
Hopper Mode
(displayed only when manual
paper feeding mode is selected)
ADF , Manual Fee O O
Wait Time for Form None , 1 - 10 - 99s O O
Paper Weight Automatic, 84g/m
2
, 105g/m
2
, 128g/m
2
, 157g/m
2
O O
Paper hold Not Use , Use × O
Setting of
Error
Detection
Automatic Paper Discharge Yes , No O ×
Sheet Empty Detection No , Yes O ×
Timing Mark Error Detection Yes , No O ×
Double-Feeding Detection Yes , No O O
Left End Skew Detection Yes , No O O
Setting of
Buzzer
Buzzer Control Valid , Invalid O O
Buzzer Sound Adjustment
(displayed only when it's valid)
1 - 3 -5 O O
Setting of
Stacker
(only when the stacker
unit is installed)
Go Out Direction Main , Select × O
List of menu modes
List of menu modes
SR-3565(E).indd 106 SR-3565(E).indd 106 2007-8-16 10:21:20 2007-8-16 10:21:20