manualshive.com logo in svg

Sekonic 401-858BR, Руководство по эксплуатации

Поделиться
Скачать
Sekonic 401-858BR Скачать руководство пользователя страница 31

23

 2.  About broncolor Radio System 

●

 

2-3-3

 

Flash Duration Analysis Radio Triggering Mode

The meter detects flash brightness after Measuring Button is pressed to send radio 

transmitted signal to radio receiver connected to flash. F-stop, flash duration time and 

graph of flash waveform are displayed for input ISO sensitivity and shutter speed. 

Flash Duration Analysis is performed with Incident Light Measuring Mode.

Operation

1) 

How to use Flash Triggering

1. 

Touch the [Measuring Mode] Icon on the Measuring Screen.

The Measuring Mode Screen is displayed.

2. 

Touch the [Flash Duration Analysis Radio Triggering Mode] Icon  
( 

 ) in Measuring Mode Screen.

When it is selected, the display changes to the Measuring Screen.

The Flash Duration Analysis Radio Triggering Mode can be selected only when the 
incident light is set in the meter.

3. 

Set the light receiving method.

Switch to the extended lumisphere ( 

 )

 or retracted lumisphere ( 

 ).

[Measuring Mode Screen]

[Measuring Screen]

[Measuring Screen]

[Measuring Mode] Icon

Содержание 401-858BR


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды