Seko Pool Basic Evo Redox, Руководство по установке

Страница: 3 / 30

0000136865 rev. 6.0 1
POOL BASIC Evo Redox
WARNINGS
!
IMPORTANT!
Before carrying out ANY work inside control panel of the Pool Basic Evo device, make sure you disconnect it
from the power supply.
FAILURE TO COMPLY WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL COULD CAUSE INJURY TO
PEOPLE AND/OR DAMAGE TO THE APPLIANCE AND THE SYSTEM.
PACK CONTENTS
A) "Pool Basic" REDOX control device
(standard model)
B) PVC Cristal 4x6 suction hose (4 m)
C) Polyethylene delivery hose (5 m)
D) Attachment screw (
φ
=6 mm)
E) Foot filter (PVC riser)
F) FPM duckbill valve (3/8” GAS)
G) SRH-1 Redox electrode
H) PSS3 probe-socket (1/2” GAS)
I) Tapping saddle for securing PSS3 onto 2”
hose (
φ
=50 mm)
L) 465 mV buffer solution kit
M) Reducer for injection valve
The Redox probe is a product subject to wear and tear and is therefore not covered by the warranty.
I
Chemical products :
Liquid chlorine or 12º beach can be used neat. If the product has a concentration of 48º, it is necessary to dilute
it in water in a 1:3 ratio.
ABSOLUTELY not recommended => All types of organic chlorine
Note: These products are DANGEROUS (IÓA) and require special precautions during use, handling and storage.
I
Pool Basic Evo was designed to regulate the Redox of tanks up to 90 m
3
.
B
NEVER mix chemical products.
B
NEVER allow children or people who have not read this manual to use or tamper with Pool Basic Evo or any of
its peripheral components (including chemical products).
TECHNICAL SPECIFICATIONS
Dimensions (H – W – L) 234x162x108 mm Maximum back-pressure 1,5 bar
Weight 1 kg Pump state Pause - Supply
Power supply 50 Hz 230 VAC Redox scale 480÷750 mV o 660÷930 mV
Consumption 7 W o 12,5 W Redox control range 0÷1500 mV
Pump flow rate 1,5 l/h; 5 l/h Device precision +/- 3 mV
Electrode regulation Automatic Calibration electrode Automatic
Wall Mounting Setup
Make sure that the injection pressure is below 1.5 bar.