Seitron S500 Скачать руководство пользователя страница 75

Страница: 75 / 82

K100000000S9 036103 130121

ANNEX B

Heading of the printed report with the PC Software “Easy2print”

The ticket heading is easily settable by the user following the simple instructions below.

1. Connect the analyzer to the PC (with Windows XP operative system or later) through the USB cable.

Browse the internet site www.seitronamericas.com and download the file of the software which it is possible

to find in the “Combustion analyzer” section. This file is in compressed version .zip.

Decompress the file so obtaining the content of the .zip file (.exe extension) and start the executable:

Details about the usage:

By pressing the “SAVE” button, the analyzer will store the inserted data and can be switched off and/or

disconnected from the PC.

Language set

Information about

the Software

Status of the PC connection

with the instrument

Click to store the

inserted data on

the instrument

Insert the data that will be

printed as header of every

report:

6 rows with 24 digits are

available (including spaces)

for each.

- THIS SOFTWARE IS A SIMPLE EXECUTABLE FILE (IT DOES NOT REQUIRE THE

INSTALLATION ON THE PC) AND IT IS COMPATIBLE WITH THE COMBUSTION

ANALYZER FIRMWARE VERSION 1.05 AND LATER.

- IF THE HEADER IS NOT INSERTED, THERE WON’T BE ANY EMPTY LINES OR ERRORS

IN THE TICKETS.

Содержание S500



















































































Результаты поиска

Содержание S500

Отзывы:

Похожие инструкции для S500

Бренды по названию

Популярные бренды

Seitron S500, Использование и обслуживание

Результаты поиска

Содержание S500

Отзывы:

Похожие инструкции для S500

Бренды по названию

Популярные бренды