background image

Please note

 

Installation shall be in accordance with AS/NZS3500.

 

All measurements are in millimetres. Height dimensions 
are to base of pan. Make allowance for bedding.  

 

Bedding: Pan may be bedded with cement base or using 
silicone sealant. Fix pan to floor using a sand cement 
mixture of 3:1 to a depth of 60mm. Do not use lime or 
fast-drying cement.  

seima.com.au

 

Bracket fixing: The pan should be bedded with silicone 
sealant and fixed with the brackets supplied. 

 

Do NOT use epoxy type adhesives.

 

Dimensions are nominal and subject to normal ceramic 
manufacturing variations. 

 

Specifications may vary without notice as part of our 
continuous improvement practices.

 

Clean with a damp cloth. Do not use abrasive cleaners, 
liquids or pastes.

CISTERN PACKAGE CONTENTS

1 x ceramic base and lid 

with raised flush buttons

containing:

1 x flush valve

1 x bottom entry inlet valve

Cistern is supplied with flush valve 

and Bottom Entry inlet valve already 

installed. See Diagram A.

PAN PACKAGE CONTENTS

IMPORTANT

1

 

Inspect the components 

before installation

 to 

ensure there are no visible defects.  If a defect is 
found, do not install the toilet suite and contact 
the supplier immediately.  Claims for defects 
will not be accepted after the product has been 
installed.

2

 

This wall faced toilet suite is suitable for a 
variety of set-ups:

 

CISTERN

 — accommodates 

Bottom Entry Inlet

 

connection (left or right stop valve). 

PAN

 — accommodates S-trap installation.

3

 

The toilet suite must be installed by a 

licensed 

plumber

. Failure to do so may void the warranty.

CERAMIC CISTERN 

comes with flush valve 

and Bottom Entry inlet 

valve already installed.

SEAT PACKAGE CONTENTS

1 x Care toilet seat and fittings

1 x ceramic pan

2 x caps (white)

2 x floor screws (+ white plugs)

2 x pan plugs (white)

Optional fixing #2 — used to secure pan to floor. 

Plastic plug is placed into hole at base of pan 

exterior; screw is rebated into plug. Cap is used 

to cover plastic plug.

PLASTIC CISTERN 

comes with flush valve 

and Bottom Entry inlet 

valve already installed.

1 x plastic base and lid 

with raised flush buttons

containing:

1 x flush valve

1 x bottom entry inlet valve

Cistern is supplied with flush 

valve and Bottom Entry inlet valve 

already installed. See Diagram A.

OR

Installation Guide

Chios Care Link Toilet Suite

CHOICE OF CERAMIC OR PLASTIC CISTERN

chios-care-link-in  |  v 1.0   |  page 1 of 5

ceramic 
cistern

plastic cistern

Содержание Chios Care Link Toilet Suite






Отзывы: