Seiko LTP1245R-C384-E, Техническое описание, Страница: 16 / 74

3-2
Table 3-1 General Specifications (Continued)
Item Specification
Operating temperature range
(No codensation) -30
°
C to 70
°
C 4
Storage temperature range
(No codensation)
-35
°
C to 75
°
C
Life span (at 25
°
C and rated energy)
Activation pulse resistance
Abrasion resistance
100 million pulses or more (print ratio=12.5%)
5
50 km or more (excluding damage due to an alien
substance such as rubbish)
Paper width 58 mm
Paper feeding force 0.49 N (50 gf) or more
Paper holding force 0.78 N (80 gf) or more
Dimensions (width
×
depth
×
height) 72
×
39.5
×
16 mm (excluding head up lever)
Weight Approximately 45 g
Recommended thermal paper
6
-5
°
C to 50
°
C
•
TF50KS-E2D (Normal thermal paper
）
from Nippon Paper Industries
•
AF50KS-E (Normal thermal paper
）
from Jujo thermal Ltd.
•
KT55F20 (Normal thermal paper
）
from Koehler AG
•
F5041 (Normal thermal paper
from
Mitsubishi Hitec Paper
•
TL69KS-HG76 (label paper)
7
from Nippon Paper Industries
-30
°
C to 70
°
C
•
TL51KS-R2 (High heat-resistant paper)
from Nippon Paper Industries
•
TL69KS-R2 (High heat-resistant paper)
from Nippon Paper Industries
5
°
C to 40
°
C
•
TW80KK-S (2-ply thermal paper)
5, 7
from Nippon Paper Industries
1
The maximum printing speed is attained, for example, in the following case:
Driving voltage 8.0V, head temperature over 10
°
C, and simultaneously activated dot number within 64 dots
2
At the operating temperature below -5
°
C, the printing of 7.0V or less (Vp) becomes light.
3
Given when simultaneously activated dot number is 64 dots during head driving.
4
Do not perform continuous printing for more than 5 minutes at the temperature over 50
°
C.
In out of temperature range -5 to 50
°
C, drive the head in the fixed 2-division driving mode.
At the temperature below -20
°
C, thermal agent may attach to the head. In such a case, clean the head.
5
In the case of thermal copying paper, the printing is executed in the 2 pulses/1 dot mode, and therefore the printing
corresponds to 50 million dots line.
6
If printing in other than this range, the printing may blur or become light.
7
Not be used in a curled path (LTP1245R, S).
0
-1