SEIKAKU TECHNICAL GROUP AUDIO MATRIX RPM200, Руководство пользователя

Страница: 10 / 16

Volume adjustment
Turn “scroll” encoder to choose the zones intended to be tuned, short pushing to confirm,
rotating “Volume” encoder to change volume value of selected ones.(shows on the upper
right corner 0-32 can be adjusted) If all zones needed, just push “Volume” encoder once to
select all and turn the “Volume” encoder.
BASIC OPERATION
OPERATION
Insert the extended reticle terminal to RD port of remote device and the other end to the
serve host. Please note link with shield cat5e or better cable, the total length end to end
should be no more than 100m.
g. XLR connector
Female 3 pin XLR connector for the gooseneck electret microphone. It uses a phantom
power controlled by software.
h. USB port
This port is used to load MP3 files for chimes sound. The maximum time for the chimes is 4
seconds.
i. RD port
Connection to the MATRIX-A8. The maximum CAT 5e cable length is 100 meters.
PHYSICAL INSTALLATION
8
AUDIO MATRIX