39 [1.54]
60 [2.36]
53.3 [2.10]
EN
1
Doc No: 596005361 Rev.2.5
3 + 4
Removal
Demontage
Démontage
Desmontaje
Desmontagem
2
4
3
CC 301
e-Thermostats / e-Hygrostats
e-Thermostate / e-Hygrostate
e-Thermostat / e-Hygrostat
e-Termostato / e-Hygrostato
e-Termostato / e-Umidostato
Device description
These devices have been designed specifically for
electrical enclosure temperature/humidity control.
Safety Information
These components must be installed / serviced
by qualified personnel complying with the
relevant safety regulations in force and in
accordance with the wiring diagram shown
on the housing / represented in this manual.
Ensure manuals are kept in a secure place
accessible to servicing / installing personnel.
Installation
The
devices
have
been
designed
for
installation on a DIN EN 60715 compliant rail.
For correct operation note the following:
● Device must be mounted VERTICALLY (do not
mount in any other position)
● Device must be mounted with a minimum of
30mm clearance around it to avoid covering of the
ventilation slots.
● Device must be mounted as far as possible from
heat generating components
Knob colour
Type
White
Electronic adjustable thermostat
Orange
Electronic adjustable hygrostat
Connection: 0.5 - 2.5 mm² / 14 - 20 AWG screw
terminal, Housing Material: Plastic UL94V-2
1 + 2
Installation
Montage
Montage
Montaje
Montagem
Ө
L/24V
COE
3
2
N/
Control range / Regelbereich / Gamme de réglage /
Rango de ajuste / Faixa de controlo
DC THERMOSTAT (°C)
0 - 60°C, 24 V DC
DC THERMOSTAT (°F)
32 - 140°F, 24 V DC
DC HYGROSTAT (%r.H.) 30 - 90 %, 24 V DC
TEMPERATURE SENSOR External cable for
thermostat
HUMIDITY SENSOR
External cable for
hygrostat
Switching capacity
16 A, resistive load
Hysteresis
3K / 5%
Switching tolerance
±5K / 10%
Rate of temperature
change
max. 1K/min.
Operating temperatures:
Thermostats / Hygrostats
-25ºC - 70ºC
-13ºF - 158ºF
Temperature sensor
-45ºC - 120ºC
-49ºF - 248ºF
Humidity sensor
-40ºC - 85ºC
-40ºF - 185ºF 100%r.H.
NOTE: To prevent damage to the contacts caused
by rapid switching, the device has a minimum ON
time and minimum OFF time of 2 to 3 minutes.
TO FIT SENSOR:
1. Remove blanking cover using
a screwdriver. 2. Insert centering ring with notch
positioned as shown. 3. Plug in sensor jack (sensor
housing colour must be of same colour as the
knob).
1
2
3
