Version No. 1-4 - 28.04.2021
Doc. No. 9942681001
8 / 18
8. Condensate management
Condensation drain (1) and oel & cleaning drain (2) pipe connection
The condensation drain (1) is in the base of the unit. The condensation drain pipe should be attached as
required e.g. in conditions of high humidity.
To install an oel & cleaning drain (2) pipe, please follow below steps:
Remove the plastic stopper from in the base of the unit (factory setting is locked)
1.
Dispose the plastic stopper but keep the Slilicon washer
2.
Insert the drain connector
3.
Lock it clockwise and fix the oel & cleaning pipe onto it
4.
