SEH ThinPrint, Руководство пользователя

Страница: 93 / 130

Maintenance
TPR User Manual 93
Displaying the job history
Proceed as follows:
1. Start the TPR Control Center.
2. Select
MAINTENANCE - Job history .

The Job History is displayed.
The following information is shown in the Job History:
Information Description
ID Identification number of the printer that has spooled the print job.
Status Status of the print connection. The following statuses are possible:
- Initialized: The connection to the ThinPrint Server is established. In
a next step, the connection to the printer will be established.
- Try to connect: The connection to the printer is being established.
- Connection rejected: The printer has refused the connection.
- Pending: The print job has been accepted by the TPR but the data
transfer to the printer has not yet started.
- Processing: The print job is being transferred from the TPR to the
printer.
- Processing stopped: The data transfer to the printer has been
interrupted. This can occur if, for example, the printer ran out of
paper.
- Completed: The TPR has completely transferred the print job to the
printer.
- Aborted: The print job has been aborted. This can occur if, for
example, the TPR has been restarted while the print job was
processed.
Protocol Protocol used to transfer the print data. The presentation consists in
a combination of the following values:
- ThP: ThinPrint
- Stp: status or service page
- Sock: RAW/socket printing
- IPP: IPP printing
- LPD: LPD printing
Name Name of the print job
Sender Name of the sending host:
- '<domain user name>@<domain>' appears with ThinPrint print
jobs.
- 'TPR-10' appears when printing a status or service page.
Start Time at which the print job has been sent to the TPR.
Size Size (in Kb) of the print job.