manualshive.com logo in svg

SEH ThinPrint, Руководство пользователя


Поделиться
Скачать
background image

Personal Printing Settings

TPR User Manual

47

5.3

How to Verify the Identity of the Personal 
Printing Server

The identity of the Personal Printing server can be verified by means
of certificates. If the verification fails, no connection to the Personal
Printing server will be established.

If the verification of the identity was enabled for Personal Printing,
a certificate from a matching CA (Certification Authority) must be
installed both on the Personal Printing server and the TPR. 

The TPR requests a Personal Printing certificate (server certificate)
from the Personal Printing server. By means of the related CA
certificate and/or Personal Printing certificate, the TPR verifies the
certificate (and thus its identity) of the Personal Printing server. 

Requirements

A Personal Printing certificate is saved on the Personal Printing 
server.

A CA certificate and/or Personal Printing certificate is saved on 
the TPR (



67).

Proceed as follows:

1. Start the TPR Control Center.
2. Select 

DEVICE - Personal Printing

.

3. Tick 

Verify certificate

.

4. Click 

Save 

to confirm.

The setting will be saved.

5.4

How to Configure the Personal Printing Printer

The authentication for retrieving print jobs is done directly on the
TPR, i.e. on the printer.

Before you can use a printer for Personal Printing, you must first set
up the printer on the Personal Printing server. It will automatically
get a printer ID. The print jobs are assigned via the printer ID.

The printer that is connected to the TPR must then be integrated to
the TPR. To this purpose, you must define the printer ID on the TPR.

Содержание ThinPrint



































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinPrint

VDO CD 1604 MP3 - Datasheet preview
CD 1604 MP3 -
Бренд: VDO Страницы: 2
Jamex 8220 User Manual preview
8220
Бренд: Jamex Страницы: 10
H&S 5134 Operator'S Manual And Parts List preview
5134
Бренд: H&S Страницы: 72
Icarus GO E600BK User Manual preview
GO E600BK
Бренд: Icarus Страницы: 13
Advantech MIC-3612/3-BE User Manual preview
MIC-3612/3-BE
Бренд: Advantech Страницы: 30
Pocketbook InkPad Color User Manual preview
InkPad Color
Бренд: Pocketbook Страницы: 105
Jensen VX4014 Operation Manual preview
VX4014
Бренд: Jensen Страницы: 103
Tolino epos User Manual preview
epos
Бренд: Tolino Страницы: 79
SaMASZ SAHARA 100 Operator'S Manual preview
SAHARA 100
Бренд: SaMASZ Страницы: 19
Q-See QSDT4PCRC User Manual preview
QSDT4PCRC
Бренд: Q-See Страницы: 56
Audiovox VME9020TS Manual & Warranty preview
VME9020TS
Бренд: Audiovox Страницы: 78
P+E Technik K01-Blue 3000 User Manual preview
K01-Blue 3000
Бренд: P+E Technik Страницы: 10
OEM BT45-NIS Manual preview
BT45-NIS
Бренд: OEM Страницы: 18
DNT MusicFly i-Select User Manual preview
MusicFly i-Select
Бренд: DNT Страницы: 48
Duerkopp Adler 550-867 s Service Instructions Manual preview
550-867 s
Бренд: Duerkopp Adler Страницы: 116
Datalogic Gryphon DX30 Reference Manual preview
Gryphon DX30
Бренд: Datalogic Страницы: 199
ASCOM NUCR-HE Installation Manual preview
NUCR-HE
Бренд: ASCOM Страницы: 12
IDTECH OMNI User Manual preview
OMNI
Бренд: IDTECH Страницы: 33

Бренды по названию

Популярные бренды

Загрузить еще бренды