SEH ThinPrint, Руководство пользователя

Страница: 33 / 130

Network Settings
TPR User Manual 33
3.5 How to Configure POP3 and SMTP
You must configure the protocols POP3 and SMTP on the TPR so that
the notification service (

41) and the administration via email
(

22) will work properly.
POP3 'POP3' (Post Office Protocol Version 3) is a transfer protocol that a
client can use to fetch emails from a mail server. POP3 is required in
the TPR to administer the TPR via email.
SMTP 'SMTP' (Simple Mail Transfer Protocol) is a protocol that controls the
sending of emails in networks. SMTP is required in the TPR to
administer the TPR via email and to run the notification service.
What do you want
to do?

’Configuring POP3’

33

’Configuring SMTP’

34
Configuring POP3
Proceed as follows:
1. Start the TPR Control Center.
2. Select
NETWORK - Email .
3. Configure the POP3 parameters; see: Table 6

33.
4. Click Save to confirm.

The settings are saved.
Table 6: POP3 Parameters
Parameters Description
POP3 Enables/disables the POP3 functionality.
POP3 - Server name Defines a POP3 server via the IP address or the host
name.
A host name can only be used if a DNS server was
configured beforehand.
POP3 - Server port Defines the port used by the TPR for receiving emails.
The port number 110 is preset. When using SSL/TLS,
enter 995 as port number.