SEH ThinPrint Скачать руководство пользователя страница 118

Страница: 118 / 130

Appendix - Parameter List

TPR User Manual

118

Table 33: Parameter List – Port Blocking

any_pwd
[Read-only user -
Password]

max. 64 characters
[a–z, A–Z, 0–9]

[blank]

Defines the password for the
read-only user account.
Note: Also is the password of
the SNMP user account.

Parameters

Value

Default

Description

drop_port_1
~
drop_port_12
[Port]

1–65535
[1–5 characters; 0–9]

Defines the port number of the
port to be blocked. A total of
12 ports can be blocked.

drop_tcp_1
~
drop_tcp_12
[TCP]

on/off

off

Blocks the access to selected
TCP ports.

TCP and UDP ports can be
blocked at the same time.

drop_udp_1
~
drop_udp_12
[UDP]

on/off

off

Blocks the access to selected
UDP ports.

TCP and UDP ports can be
blocked at the same time.

drop_lan_1
~
drop_lan_12
[LAN]

on/off

off

Blocks the access to selected
LAN interfaces (network
connection).

Printer and LAN interfaces
can be blocked at the same
time.

drop_nat_1
~
drop_nat_12
[Printer]

on/off

off

Blocks the access to selected
printer interfaces (printer
connection).

Printer and LAN interfaces
can be blocked at the same
time.

Parameters

Value

Default

Description

Содержание ThinPrint



































































































































Результаты поиска

Содержание ThinPrint

Отзывы:

SEH ThinPrint, Руководство пользователя, Страница: 118 / 130

Результаты поиска

Содержание ThinPrint

Отзывы: