Maintenance
myUTN User Manual Windows
112
3. Click the icon
.
The current parameter values are displayed.
4. Save the '<default name>_parameters.txt' file on a local system
with the help of your browser.
The parameter file is copied and secured.
Loading the Parameter file onto the UTN Server
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
MAINTENANCE – Parameter backup
.
3. Click
Browse
.
4. Specify the '<default name>_parameter.txt' file.
5. Click
Import
.
The parameter values in the file are applied to the UTN server.
myUTN-800: If you want to load the parameter values and certifi-
cates from an automatic backup on an SD card, perform a cold start
of the UTN server (interrupt and re-establish the power supply).
Automatic backup (myUTN-800 only)
Requirements
An SD card is connected to the UTN server.
The SD card has the file system FAT12, FAT16 or FAT32.
1 MB of free space is available on the SD card.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
MAINTENANCE – SD card
.
3. Tick
Parameter backup
.
4. Click
Save
.
The settings are saved.
