Sega TETRIS GIANT, Руководство пользователя

Страница: 25 / 214

16
ASSEMBLY AND INSTALLATION
● Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
● When assembling, be sure to use plural persons. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
● Ensure that connectors are accurately connected. Incomplete connections can
cause electric shock.
● This work should be carried out by site maintenance personnel or other qualified
professionals. Work performed by non-technical personnel can cause a severe
accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation.
If no one with proper technological expertise is available, request service from
the office indicated in this document or the point-of-purchase so as to ensure
safety.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
● Do not leave power cable exposed over passageways. Exposure could lead to
damage, electric shock or short circuit. Wherever wiring has been laid out on
a floor surface, use a wiring protection cover. (Wiring diameter: Power cable,
approx. 8 mm)
● Be careful in handling plastic parts. Be sure not to tighten screws or nuts too
tightly. Do not apply excessive force or shock to these parts. Failure to observe
this instruction may result in breakage, and broken pieces and cracks or chips
in these parts may cause personal injury.
● When opening/closing or attaching/removing doors or lids, be careful that your
hand or finger does not get caught in anything.
● Use a stable stool so that work can be carried out safely and securely. Working
without a stable stool could result in a fall or injury.
● Wear appropriate work clothing so that work can be performed safely. Use
gloves and safety shoes to prevent accidents or injuries.
● Make sure there is a level, 5 m square space in which to perform the work. If the
space is too small, sloped, uneven, or has grooves, it could lead to an accident.
It will also make the assembly work more difficult to perform.
● When installing a wire protection cover over a floor, use a material shaped
so that no one passing by will stumble over it. Using a material that could be
stumbled over might lead to an accidental fall.
6
ASSEMBLY AND INSTALLATION
6