Sega GHOST SQUAD - EVOLUTION Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 133

Sega GHOST SQUAD - EVOLUTION Скачать руководство пользователя страница 55

50

EXPLANATION OF TEST AND DATA DISPLAY

9

Perform tests and data checks periodically by manipulating the TEST Button and SERVICE Button in the cabinet.
Follow the instructions in this chapter to conduct checks when the game machine is ﬁrst installed, when money is
being collected, or when the game machine does not operate properly.

Shown below are the tests and screens to be used for different problems.
This product uses a LINDBERGH game board and a DVD DRIVE. In the system, a different game can be played by
putting a different DVD ROM in the DVD DRIVE.

For this reason, the product’s Test Mode consists of two modes: a System Test Mode for systems in which coin set-
tings, for instance, are made for products that use the same system, and a Game Test Mode for setting of difﬁculty
level, etc., and for input/output test of operational units used exclusively with this product.

NOTE:

“ S/M” in the table denotes LINDBERGH service manual, which is provided separately.

ITEMS

DESCRIPTION

REFERENCE SECTIONS

Game machine
installation

1. Conﬁrm that the information display screen appears

Cin normal fashion.

“S/M” Chapter 4

2. Investigate each input device on the input test screen.

“S/M” Chapter 4, 9-3a, 9-3c

3. Investigate each output device on the output test screen.

“S/M” Chapter 4, 9-3b

Periodic mainte-
nance

1. Check settings.

“S/M” Chapter 4, 9-3d

2. Test each input device on the input test screen.

“S/M” Chapter 4, 9-3a, 9-3c

3. Test each output device on the output test screen.

“S/M” Chapter 4, 9-3b

Control problem

1. Investigate each input device on the input test screen.

“S/M” Chapter 4, 9-3a, 9-3c

2. Adjust or replace each input device.

Chapter 11

3. If the problem persists, examine the mechanical

components of each input device.

Chapter 11

Monitor problem

On the monitor adjustment check screen, check to be
sure the monitor has been adjusted properly.

“S/M” Chapter 4, Chapter 10

IC board problem

1. Information display screen

“S/M” Chapter 4

2. Speaker test

“S/M” Chapter 4

Data Check

Check data on game play times, histograms, etc., and
adjust the level of difﬁculty.

9-3e

TABLE 9

«
...
53
54
55
56
57
...
»

Содержание GHOST SQUAD - EVOLUTION






































































































































Отзывы:

Нет отзывов