manualshive.com logo in svg

Sega GHOST SQUAD - EVOLUTION, Руководство пользователя, Страница: 17 / 133

Поделиться
Скачать
Sega GHOST SQUAD - EVOLUTION Скачать руководство пользователя страница 17

12

ACCESSORIES

5

The parts listed in Table 5b must always be attached when using the product. They are attached while assembling 
and installing the product. 

POWER CABLE
600-6729-01 (1) <Taiwan>
600-6619-02 (1) <Singapore, Malaysia>
600-6618-01 (1) <Others>
For installation, see chapter 6

DVD DRIVE and DVD wire are sold separately but they are required for installing the product’s software. If they 
were not provided when the product was delivered, consult with the point of purchase, or arrange to obtain the fol-
lowing kit numbers. The DVD DRIVE and DVD wire that are accessories to “The House of the Dead 4” can also be 
used with this product.

TABLE 5c XKT-1515-01: DVD DRIVE KIT FOR LBG ENG

To order the DVD-ROM by itself, use the following part number: 
610-0727-0029 (DVD SOFT GSE). 

844-0012D-02

TABLE 5b

STICKER 840-0012D-02
443-40012D-02 (1)
Board number stickers, see chapter 6 [11]

DVD SOFTWARE KIT 
(1)
Software media, see chapter 6 [13]

DVD DRIVE (Optional)
610-0719-01-91 (1)
For software installation, see chapter 6 [11]

DVD WIRE (Fitted)
605-0094 (1)
For software installation, see chapter 6 [11]

CUSHION SPONGE

601-11137 (1) 
(Protective material)

KEY CHIP (1)

DVD-ROM (1)

DISC CASE 

253-5507-01 (1)

Содержание GHOST SQUAD - EVOLUTION






































































































































Отзывы:

Нет отзывов