Sega AV F-ZERO AX, Руководство пользователя, Страница: 56 / 252

− 49 −
1500mm
1020mm
● Use blankets or other soft materials to avoid scratching the surface of
removed parts.
● Certain types of floor surfaces may become scratched during
disassembly. Check to make sure the floor is of an appropriate type
before beginning work.
If the entryway to the installation location is too narrow or low, follow the steps listed below to
disassemble the machine.
In the steps listed below, removing the coin chute tower will reduce the machine's width to 1020
mm. Removing the monitor box will reduce its height to 1500 mm.
After disassembling the machine and transporting it through the door, reverse the procedure to
reassemble it.
FIG. 8. 2
● In order to ensure safety and reliability, use a solid, sturdy stepladder
when performing these operations. Failure to do so may cause
personnel to slip and fall or the machine to tip over.
● Be careful when handling parts made of plastic. Handling these parts
carelessly may damage them, and the resulting shards and cracks
may injure personnel.
● When securing plastic parts in place, take care not to make the screws
and nuts too tight. Doing so may damage these parts, possibly
resulting in injury to personnel.