SD Card shield V4.0
Contents
[
hide
]
Introduction
This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s
built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous
versions, it combines the standart SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD
cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitates your
connection with Grove modules.
Features
Stand SD card
、
SDHC card and TF card compatible
UART Grove & I2C connection compatible
Fully supported SD Library
Minimal number of SPI port
Truly stackable
Specification
Item
Min
Typical
Max
Unit
Voltage
3.5
5.0
5.5
V
Current
0.159
100
200
mA
Supported Card Type
SD card(<=16G); Micro SD card(<=2G); SDHC card(<=16G)
/
Dimension
68.7x53.5x19.00
mm
Net Weight
14.8
g
Interface Function
Search
Go
Search
Navigation
Support
Toolbox
