INSTALLATION
MOUNTING:
1. The Securview™ SV-6940.LM Rear Vision System uses a wide-angle lens for best all around
performance. The Camera will display the full width of most parking spaces up to 7 feet or
even wider.
2. The SV-6940.LM is a Universal Lip Mount style camera which has a small design that allows
it to be mounted in several different locations around the vehicle such as the License Plate
Bezel, Trunk Lid, Front / Rear Bumper, Etc. Choose where you want the camera to be
located. Make sure that there is nothing behind the mounting surface that can be damaged
when the camera is mounted into place
3. Carefully choose a location to route the video / power cable into the vehicle. If you have to
drill a hole to route the cable, make sure there is nothing behind the drilling surface that can
be damaged.
4. Secure the camera into place using screws or double-sided tape. (If using double-side tape,
make sure the surface is very clean before applying the tape)
5. Once the camera is mounting, secure the video / power cable with zip ties or tape to ensure
that it does not move around freely.
License Plate
Camera Lens
Mounting
Surface
Cable
Mounting Screw
REVERSE (MIRROR) IMAGING:
The SV-6940.LM.II Camera has built-in circuitry to “mirror” the image so objects on the right of
vehicle appear on the right and objects on the left appear on the left when looking at a standard
monitor. If your existing monitor or in-dash monitor has a reverse camera input where the monitor
itself performs the mirror image, then your picture will not be correct. If this happens, the SV-
6940.LM.II camera has a white wire that can be connected to reverse the image back to normal. (See
Wiring Diagram)
