INSTRUCTIONS
RIDGE REMOTE (433 MHZ)
Model
14-R433
1 of 2
IN THE BOX
Make sure you have everything shown here.
This remote must be paired to and used
with a Security Brands Ridge 2.0 Transceiver
(Model 14-REC20) to work correctly.
Ridge Remote
Visor Clip
Button 1
LED
PROG LED
PROGRAMMING PAIR
Button
Button 2
WHAT’S WHAT
The Ridge Remote has two programmable buttons and
a status LED. Each button can be paired to a separate
modes of operation.
BASIC SETUP
1. On Ridge 2.0 Transceiver, hold down
PROGRAMMING PAIR button for three seconds
and release. PROG LED will light up.
NOTE: The transceiver must be powered up and
have its cover removed for this step. Please see the
instructions that came with it for help.
2. On Ridge Remote, press and hold down both
buttons and pay attention to remote LED.
