General information
ASD 535, Mounting and installation, T 140 333 d en
7 / 40
1
General information
1.1
Purpose
The ASD 535 aspirating smoke detector performs the task of taking continuous air samples via one or two sampling pipe tube
networks from a monitored sector and feeding the samples to one or two smoke sensors. Thanks to this detection method and
the product’s excellent properties under severe ambient conditions, the ASD 535 aspirating smoke detector is used wherever
problems are to be expected owing to poorly accessible monitored areas or latent disturbance variables during operation such
that optimal protection can no longer be guaranteed with conventional point detectors.
The ASD 535 aspirating smoke detector is available in four versions:
•
ASD 535-1
for 1 sampling tube without smoke level indicator, for 1 smoke sensor
•
ASD 535-2
for 2 sampling tubes without smoke level indicator, for 2 smoke sensors
•
ASD 535-3
for 1 sampling tube with smoke level indicator, for 1 smoke sensor
•
ASD 535-4
for 2 sampling tubes with smoke level indicator, for 2 smoke sensors.
The SSD 535 smoke sensor is used in the ASD 535. It is available in the three following versions and sensitivity ranges:
•
SSD 535-1
alarm sensitivity range 0.5%/m to 10%/m
•
SSD 535-2
alarm sensitivity range 0.1%/m to 10%/m
•
SSD 535-3
alarm sensitivity range 0.02%/m to 10%/m.
The ASD 535 aspirating smoke detector has four slots for expansion modules. The following modules can be added:
•
XLM 35
eXtended Line Module (only if no SLM 35 fitted)
•
SLM 35
SecuriLine module (only if no XLM 35 fitted)
•
RIM 35
Relay Interface Module with 5 relays
•
MCM 35
Memory Card Module
•
SIM 35
Serial Interface Module
Содержание ASD 535
Страница 4: ......