Securepoint RC 100, Обзор продукта

Страница: 57 / 210

7 Menu Network Securepoint 10
Securepoint
Security Solutions 57
7.2.5 DHCP
The Dynamic Host Configuration Protocol can assign IP-addresses and other network set-
tings to the clients. If you start a client of the internal network, the operating system of the
client sends a query to the DHCP services of the server. The server transmits an available
IP-address, the IP-addresses of the DNS server and of the default gateway to the client.
If you don’t want to use this service, make no entries in this section and disable the client
DHCP Server in the menu applications
à
Service Status .

Enter the internal subnet into the field Local Subnet and the relating subnet mask in-
to the field Netmask .

Define the IP address range. The DHCP server will assign IP addresses to the clients
from this range.
The range must be a part of the local subnet. Consider that the first address
(xxx.xxx.xxx.1) is mostly assigned to the default gateway. Hence it cannot be part of
the DHCP address pool. Furthermore reserve a couple of IP addresses for computer
and server which need static IP addresses to warrant the correct working of several
services.
Enter the lower limit of the range into the field
DHCP-Pool start and the upper limit
into the field DHCP-Pool end .

Enter the standard gateway into the field Default Gateway . This is the IP address of
the internal interface.

Type the IP addresses of the DNS server into the fields Nameserver #1 and Name-
server #2 .

Type the IP addresses of the WINS server into the fields WINS Server #1 and WINS
Server #2 , if you use them.

Store your settings with Save .
fig. 58 settings for DHCP server