Install the ETM® Software
23
Multiple application instances of the Management Server and Report Server
can be installed on a single computer. If you plan to install multiple
instances, see "Running Multiple Application Instances on One System" in
the
ETM
®
System Technical Reference
for instructions, and then resume this
guide with "License the Management Server and Report Server" on page
29. The procedures below explain typical installation of a single instance.
By default, all of the ETM Applications, system files, and documentation
are installed in the directory
/opt/SecureLogix/ETM
.
To install the ETM
®
Applications on Solaris
1.
Open an XTerm window or other command-line shell.
2.
If not already logged on as the root user, use the "su" command to
change to the root account.
3.
Insert the installation CD into the CD-ROM drive.
4.
Change your working directory to
/usr/local
by typing at the prompt:
cd /usr/local
5.
If version 1.6.0_12 of the Java Runtime Environment (JRE) is not
installed, install the JRE supplied on the installation CD by typing at
the prompt:
/
cdrom/cdrom0/Software/JRE-1.6.0_12/jre-
1_6_0_12-solaris-sparc.sh
The JRE is installed in a subdirectory of the
/usr/local
directory
named
jre1.6.0_12
.
6.
Begin the ETM System Software installation by typing at the prompt:
pkgadd -d
/cdrom/cdrom0/Software/Installer/ETM_6.1_b
n
where
n
is the build number of the installer.
About Multiple
Application
Instances
Installing the
ETM
®
Software
(Solaris)
You may be prompted
for the base directory,
the top-level directory
to which the application
files should be installed
(for example,
/opt
).
