Programming
ScanLogic Basic
A.
Open lock
1)
Enter default Manager code 123456
B.
Change Code
1)
Enter 000000
2)
Enter existing code, 1 beep
3)
Enter new 6 digit code, 1 beep
4)
Repeat new 6 digit code, 2 beeps
*Manager code of 123456 must be changed before
any other Users can be added
**Reset Code must be changed from default
***1 long beep means code is not allowed
C.
Add Manager fingerprint(s)
1)
Open with Manager code/fingerprint
2)
Hold “+,” and hold until 1 beep
3)
Place fingerprint 4X, 1 beep each
4)
2 beeps confirms fingerprint addition
*Manager can add up to 5 fingerprints
D.
Add User1 Code
1)
Open with Manager code/fingerprint
2)
Hold “1,” 1 beep
3)
Enter new 6 digit code, 1 beep
4)
Repeat new 6 digit code, 2 beeps
E.
Add User2 Code
1)
Open with User1 code/fingerprint
2)
Hold “1,” 1 beep
3)
Enter new 6 digit code, 1 beep
4)
Repeat new 6 digit code, 2 beeps
F.
Add fingerprints
5)
Open with own code/fingerprint
6)
Hold “+,” 1 beep
7)
Place fingerprint 4X, 1 beep each
8)
2 beeps confirms fingerprint addition
*User1 and User2 can add up to 5 fingerprints
G.
Delete own fingerprints
(All)
1)
Open with your own code/fingerprint
2)
Hold “-”, 2 beeps
*All of your fingerprints have been deleted
H.
Delete User2
(Code & fingerprints)
1)
Open with User1 code/fingerprint
2)
Hold “3”, 2 beeps
*User2 code and fingerprints are deleted
I.
Delete All
(Codes/fingerprints)
1)
Open with manager code/fingerprint
2)
Hold “3”, 2 beeps
*Manager code remains unchanged, User1 and
User2 are deleted
J.
Reset
(resets codes to factory default)
1)
Input reset code, default is 999999
2)
Hold “6”, 2 beeps
*Lock is in default mode, Manager code reverts to
123456, Reset code remains unchanged
K.
Turn beeper off
1)
Open with Manager or User1
code/fingerprint
2)
Hold “4,” 1 beep
L.
Turn beeper on
1)
Open with Manager or User1
code/fingerprint
2)
Hold “4,” 2 beeps
Security Levels:
Security Level 1 = Fingerprint or code
Security Level 2 = Fingerprint and code
M.
Change to Security Level 2
(fingerprint
and
code)
1)
Open with Manager or User1
code/fingerprint
2)
Hold “5,” 1 beep, then 2 beeps
N.
Change to Security Level 1
(fingerprint
or
code)
1)
Open with Manager or User1 code and
fingerprint
2)
Hold “5,” 1 beep, then 1 beep
**The Reset Code must be changed from default 999999 to a unique
number. Follow the Change Code process detailed in Item “B.” below.
