Intruder alarm system
System with
KM24, KM24A
, KM24G keypads
Page 13
SERVICE MODE MENU TREE
Service
M
ode
Modules
Module settings
Basic settings:
Name
Address
Type
Serial No.
Use Module Tamper
Control panel settings:
PGM load detection
Cut - off +BELL
Cut - off -PGM(1)
Cut - off +PGM(2)
Arm anyway
Keypad settings:
Assigned partitions
Fire alarm
Medical alarm
Panic alarm
Panic silent
PROX8 settings:
Assigned partitions
Installation
Preferred mode
Second mode
Third mode
Fourth mode
Sound
Hide LED indication
Unknown tag
Operation mode
EXT116S(VM) settings:
MC & IR Anti-sabotage
Roller Anti-sabotage
Automatic registration
Manual registration
Partitions
Zones
PGM Outputs
System times
System Setup
Report settings
PSTN Communicator
Reporting
Account number
Reporting
Tel. Number 1
Tel. Number 2
Tel. Number 3
Tel. Number 4
Account number
Dials In Session
Sessions
Pause Btw Sessions
Dial Tone Test
Method
Line Monitoring
Line Loss Delay
Rings to answer
Double call timer
SERIAL Interface
GPRS settings
LAN settings
Receiver No.1
Use GPRS as backup
Address
Port
Account number
Protocol
Transport
Receiver No.2
Use as backup for Rec.1
Address
Port
Use same Acc. as Rec.1
Account number
Protocol
Transport
APN
User name
Password
Periodic test
Send every
Receiver No.1
Address
Port
Use SERIAL account
Account number
Protocol
Transport
Receiver No.2
Use as backup for Rec.1
Address
Port
Use SERIAL account
Account number
Protocol
Transport
Periodic test
Send every
Obtain IP automatic.
IP address
Subnet mask
Gateway
Obtain DNS automatic.
DNS server 1
DNS server 2
Periodic Test Settings
Period in hours
Period in days
Period time (hh:mm)
Name
In Use
Exit Delay
No Entry Delay
Arming timer
Pre-alarm timer
Name
Address
Loop type
Serial No.
Model
Loop (zone)
Use tamper
Operation code
Belongs to partition
Definition
Zone speed
Supervisory window
Temperature
Enable bypass
Arm on exit
Armed in Night
Fire Verification
Entry Route
Exit Route
Limit alarms
Limit reports
Pre-alarm
Voice menu
Name
Address
Definition
From zones
From modules
From partitions
From timers
Pulse length
Inversion of status
Pulse
Latch
Pre-alarm
Fail to Arm Notific.
Arm Notification
Disarm Notification
Exit delay (PAS808M)
KM24 Alarm Time
Auto Arm Delay
Pre-Alarm time
AC Loss Rep. Delay
Detector Settle Time
Fire Verific. Time
Immediate entry alarm
Security Settings
Arm with PIN
Pre-alarm with PIN
Bypass with PIN
Sys. summary PIN req.
PIN resetting
Duress code
Project Loading
Set Language
Unregister Modules
Start connection with PC
From CP to KM24
From KM24 to CP
Restore Project
Restore Main Settings
Restore Default Project
Unregister keypad
English
Short programming manual - basic information
Rev.15/03/21_KF_Sert
Wireless Subsystem
Security grade
Mode
Frequency
Attenuation
