ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
45
4.3.4.1
CPU Power Management submenu
4.3.5
AMI graphic Output Protocol Policy submenu
4.3.6
PCI Subsystems Settings
Menu Item
Options
Description
EIST
Disabled / Enabled
Enables or disables Intel
®
SpeedStep
Turbo mode
Disabled / Enabled
Only Available when
“
EIST
”
is enabled. Enables or disables the Turbo Mode
Boot Performance mode
Max performance
Max battery
Select the performance state that the BIOS will set before OS handoff.
Power Limit 1 Enable
Disabled / Enabled
Enables or disables Power Limit 1. When Enabled, the following menu items will appear
Power Limit 1 Clamp Mode
Disabled / Enabled
When Power Limit 1 is Enabled. Enables or disables the Clamp Mode
Power Limit 1 Power
Auto / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
Power Limit 1 in Watts. Auto will program Power Limit 1 based on silicon default support value.
Power Limit 1 Time Windows
Auto / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /
10 / 12 / 14 / 16 / 20 / 24 / 28 /
32 / 40 / 48 / 56 / 64 / 80 / 96 /
112 / 128
Power Limit 1 Time Window Value in Seconds. Auto will program the Power Limit 1 Time Window based on
silicon default support value
Menu Item
Options
Description
Output Select
List of available / connected
module
’
s video interfaces
User select monitor for graphic console output in the pre-OS phase
Menu Item
Options
Description
Above 4G Decoding
Disabled / Enabled
Globally Enables or Disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if
System Supports 64 bit PCI Decoding)
BME DMA Mitigation
Disabled / Enabled
Re-enable Bus Master Attribute, disabled during Pci enumeration for PCI Bridges after SMM Loocked
Hot-Plug support
Disabled / Enabled
Globally Enables or Disables Hot-Plug support for the entire System. If System has Hot-Plug capable Slots
and this option set to Enabled, it provides a Setup screen for selecting PCI resource padding for Hot-Plug
