ENFORCER
Shock/Vibration Detector
4
SECO-LARM U.S.A., Inc.
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO
SECO
SECO
SECO----LARM
LARM
LARM
LARM
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: sales
@
seco-larm.com
MiSS-040Q_1110.docx
Order Part # 763-020-3%
PITSW1
Also Available from
SECO-LARM:
Entry Alert System
E-931CS22RRCQ
Audio Discriminator
•
For monitoring an entrance or use as an
entrance indicator
•
Retro-reflective beam sensor.
•
Range up to 22 feet.
E-190
•
Covers an area 45 feet in front and
25 feet to either side.
•
Incorporates SECO-LARM’s
patented yellow turbulence LED.
Twin or Quad Photobeam Detectors
E-964-D90Q
•
Twin beams available in ranges up to
90, 190, 290, and 390 feet.
•
Quad beams available in ranges up to
165, 330, 495, and 660 feet.
Reflective-Beam Sensor
E-931-S35RRQ
•
For garage doors, outdoor gates or overhead
doors or as a sensor for industrial automation.
•
Weatherproof (IP66) design for indoor/outdoor
applications
(shown)
SECO-LARM carries a complete line of security products.
For more information please visit www.seco-larm.com
MANUAL
SS-040Q
Mini Shock/Vibration Detector
The ENFORCER
SS-040Q MINI SHOCK/VIBRATION DETECTOR
is designed for protection
against forced entry by a hammer, saw, crowbar, etc. through walls, ceilings, windows, safes,
cabinets, etc. For use in closed-circuit alarm systems, the
SS-040Q
will initiate an alarm when
a vibration of considerable force strikes the protected surface. A built-in tamper switch is
independently wired from the vibration detector for enhanced security.
Vibration contacts are adjustable by turning an adjustment screw to respond on any surface -
glass, wood, steel, plasterboard, or brick. Pure silver contact points ensure years of long-term
operation. Dust-tight ABS case is small and can be easily mounted inside with two-sided
adhesive tape.
NOTE: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHs compliant.