19
Rates and expos
Use the recommanded expos to soften the feel of the model, expecially on high 3D rates. The goal
is to get the model to feel the same around neutral as it does on low rates.
Use low rate settings for all flying, included starts and landings, and high rate for 3D aerobatics.
For precision flying or general sport fliers, the low rate throws are perfect, even for snap rolls.
When doing 3D aerobatics, flip to 3D rates just before the manouer. As soon as the manouver is
done, flip back down to low rate to avoid over-controlling the model.
Recommended CG
The recommended Center of Gravity location is 115mm behind the leading edge of
the wing against the fuselage: exactly in center of the wings carbon tube.
110mm is good for pattern flying.
120mm is good for 3D flying.
Use the FlightPower battery pack, moving it forward or backward, to achieve the correct balance.
A FlightPower 3s 2170 for more agility and a 3s 2500 for precision and sports flying.
Range test your radio
step 1
Before fly, be sure to range check your radio as manufacturer’s instruction manual of you radio-
system recommand.
step 2
Double-check all controls (aileron,elevator, rudder and throttle) move in the correct direction.
step 3
Be sure that your FlightPower batteries are fully charged, as per the instructions included with
your batteries and that your radio is fully charged as per its instructions.
Finally...
Finally...
Finally...
Finally...
ha
ha
ha
have a nice flight!
ve a nice flight!
ve a nice flight!
ve a nice flight!
SebArt di Sebastiano Silvestri
Via Roma 83/85
38017 Mezzolombardo (TN) – Italy
www.sebart.it
