Seat Toledo 2019, Руководство пользователя, Страница: 45 / 300

The essentials
Coolant
Fig. 52
Engine compartment: coolant expan-
sion tank cap.
The coolant tank is located in the engine
compartment
›››

page 246 .
When the engine is cold, replace the coolant
when the level is below

.
Coolant specifications
The engine cooling system is supplied from
the factory with a specially treated mixture of
water and at least 40 % of the additive
G13
(TL-VW 774 J), purple. This mixture gives the
necessary frost protection down to -25°C
(-13°F) and protects the light alloy parts of
the engine cooling system against corrosion.
It also prevents scaling and considerably rai-
ses the boiling point of the coolant.
To protect the cooling system, the percent-
age of additive must always be at least 40 %,
even in warm climates where anti-freeze pro-
tection is not required.
If for weather reasons further protection is
necessary, the proportion of additive may be
increased, but only up to 60 %; otherwise an-
tifreeze protection will diminish and this will
worsen cooling.
When the coolant is topped up, use a mixture
of
distilled water and at least 40 % of the
G13 or G12 plus-plus (TL-VW 774 G) additive
(both are purple) to obtain optimal anti-cor-
rosion protection. The mixture of G13 with G12
plus (TL-VW 774 F), G12 (red) or G11 (green-
blue) engine coolants will significantly re-
duce anti-corrosion protection and should
therefore be avoided.

›››
in Topping up the coolant level
on page 250

›››
page 248
Brake fluid
Fig. 53
Engine compartment: brake fluid reser-
voir cap.
The brake fluid reservoir is located in the en-
gine compartment
›››
 page 246 .
The level should be between the

and

marks. If it is below

, please visit a Technical
Service.
 ›››
in Checking brake fluid level on
page 250

›››
page 250
43