![Seat Tarraco 2020 Скачать руководство пользователя страница 265](http://html1.mh-extra.com/html/seat/tarraco-2020/tarraco-2020_owners-manual_1229334265.webp)
Start and driving
It lights up yellow
Limited steering operation.
Drive carefully to a specialised workshop to have the
steering checked.
If the warning light does not come on again after re-
starting the engine and driving a short distance, it is
not
necessary to check the steering.
OR:
The 12-volt battery was disconnected and re-
connected.
Drive a short distance at 15-20 km / h (9-12 mph).
It flashes yellow
The steering column is jammed.
When stopped, turn the steering wheel in both direc-
tions.
OR:
The steering column does not unlock or lock.
Remove the key from the ignition switch and recon-
nect it. Consider the messages shown on the instru-
ment panel display.
Do not continue driving
if the steering column re-
mains locked after switching on the ignition. Seek
specialist assistance.
The control lamp should light up for a few
seconds when the ignition is switched on. It
should go out once the engine is started.
WARNING
Never ignore the warning lamps or messag-
es.
●
If the warning lamps and the correspond-
ing messages are ignored, the vehicle may
stall in traffic, causing serious damage or
accidents and injuries.
●
Stop the vehicle at the next opportunity
and in a safe place.
SEAT Driving modes (SEAT
Drive Profile)*
Introduction
The SEAT Drive Profile enables the driver to
choose between the
Eco
,
Normal
,
Sport
and
Individual
profiles and modes, which modi-
fy the behaviour of various vehicle functions,
providing different driving experiences.
In addition, the 4Drive version features the
Offroad
and
Snow
profiles.
The
Individual
profile can be configured
according to personal preferences. The other
profiles have a fixed configuration.
Description
Depending on the equipment fitted in the ve-
hicle, SEAT Drive Profile can operate on the
following functions:
Engine
Depending on the profile selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed. When
Eco
mode is
selected, the Start-stop function is activated.
In vehicles with automatic transmission, the
gear change timing is changed to put the
changes at higher or lower revolutions.
Eco
mode activates the Inertia function, thereby
reducing consumption. The rest of the driving
modes will activate the inertia use function
when the selector lever is not in the
S
posi-
tion, depending on how the accelerator ped-
al is released
. When the vehicle
is turned on again, the function is activated
by default to reduce consumption.
With a manual gearbox, the
Eco
mode
changes the gear changes recommenda-
tions to facilitate more efficient driving.
Dynamic chassis control (DCC)
DCC continuously adapts the shock absorb-
ers to the condition of the road and current
driving conditions, according to the pre-set
programme.
In the event of a fault in the DCC, the follow-
ing message is displayed on the instrument
screen
Fault: shock absorber regula-
tion
»
263
Содержание Tarraco 2020
