21
Audio mode
Inserting a CD
●
Hold the CD with the printed side facing up.
●
Push the CD into the CD slot
⇒
fig. 1
5
only to the point where it is
drawn in automatically.
●
When the CD is inserted, the play function will start automatically.
When other functions are selected (e.g. RADIO), if a CD is inserted in the in-
ternal CD drive
CD-IN
is displayed at the top left of the screen (e.g.
⇒
fig. 9
).
Ejecting CDs
●
Press the
EJECT
unit button.
●
The CD in the drive will be ejected and must be removed within 10 sec-
onds.
If the CD is not removed within 10 seconds, it is retracted again for safety
reasons.
Error messages on the screen
A reading error is indicated by
ERROR
in the title bar.
An error message in the bottom line of the screen indicates the possible
cause of the error.
Message
Meaning and consequences
NO CD
No compatible data medium.
It is not possible to switch to Media mode.
CD ROM
Data CD inserted.
CD will be ejected.
CHECK CD
The inserted CD cannot be read.
CD will be ejected.
Check for damage.
Message
Meaning and consequences
TEMPERATURE
CD drive is too hot.
CD playback is disabled.
Another audio source will be played.
SERVICE
Mechanical fault in the CD drive.
Contact a qualified workshop.
Note
Uneven road surfaces and strong vibrations may cause the CD to jump.
Selecting a media source
Fig. 13 Media selection menu: CD being played from the internal CD drive.
When you switch to Media mode, the available media sources are displayed
for roughly 5 seconds in the bottom line of the screen. The media source
currently playing is underlined on the display
⇒
fig. 13
.
Содержание SOUND SYSTEM 2.0
Страница 3: ......
