16
Audio mode
Storing stations automatically with Autostore (AUTOSTORE)
The Autostore function automatically stores the stations with the strongest
reception at the current moment to the six station buttons in the currently
selected memory level.
●
Select the frequency band and memory level.
●
Press the
MENU
unit button to open the additional functions
⇒
fig. 6
.
●
Press and hold the
AUTOSTORE
function button until
AUTOSTORE
appears
in the centre line of the screen.
●
This procedure can take some seconds. When the stations have been
stored,
AUTOSTORE
disappears from the display.
Selecting stored stations
●
Select the frequency band and memory level in which the desired sta-
tion is stored.
●
Briefly press
the station button above which the desired station is dis-
played.
●
Alternatively: Depending on the settings, you can browse through the
stored stations with the
SEEK / ...
rocker switch (
SETUP: SEEK MODE
PRE-
SET
⇒
page 35).
It is only possible to play a stored station if it can be received at your current
location.
TP function (Traffic Programme)*
Introduction
The TP (Traffic Programme) function is not available for all versions.
When the radio version does not have the traffic news reception function,
no action is taken when the
TP
button is pressed (
TP
is not displayed in the
upper left of the screen).
While traffic news monitoring is on (display:
), traffic announcements will
interrupt the current Audio mode.
Additional information:
●
Safety notes
⇒
page 6
●
Unit overview
⇒
page 8
●
Radio mode
⇒
page 12
●
Settings menus
⇒
page 34
Traffic news monitoring with the TP function
Fig. 9 TP function active.
Fig. 10 Traffic news monitoring in Media mode.
Содержание SOUND SYSTEM 2.0
Страница 3: ......
