Drives
30
•
Make sure that the iPod is fixed in place with one of the adapters
supplied.
Note
•
Your Dealer also offers appropriate adapters for iPods that are not latest
generation.
•
For further information on adapter adaptation, please see the information
enclosed with the adapters supplied.
Inserting the iPod into the iPod interface
– Switch on the navigation system
– With the display facing upwards and the contact towards the
front, slide the iPod into the bay until you hear it engages. The
iPod will switch on automatically and the battery will be charged.
– If the navigation system does not detect the iPod after you insert
it, please “reset” the iPod (refer to the iPod operating instruc-
tions).
To start the iPod, press the
The iPod is switched off automatically when you switch off the navigation
system or the ignition.
Note
•
To ensure optimum sound quality, you should enable the “sound check”
setting on the iPod and disable the “EQ” (equaliser) before inserting the iPod
(please refer to the iPod operating instructions).
•
Slight scoring marks may occur on the iPod when used with the adapter.
Functions
The iPod is operated using the navigation system controls.
– To start the iPod, press the
button.
The following functions are available:
•
Play all tracks stored on the iPod
•
Select directly and play up to five track lists
•
Switch between the different track lists
•
Fast forward and rewind within a track
•
Change tracks within a playlist
•
Play tracks in shuffle mode ("shuffle")
•
SCAN function
For further information on handling, please refer to the “MEDIA” chapter
Tips
Here are some tips and points to remember when using the iPod in the
vehicle:
•
Track numbers appear with a maximum of two digits in the navigation
system display. The first digit is suppressed if you select a track with a three-
digit number, i.e. track 125 and track 25 are both displayed as track “25”. For
this reason we do not recommend allocating more than 99 tracks to each
playlist.
•
If you reach the end of a playlist when selecting a track directly
(forward/reverse), the count is resumed at track “1”.
MEDIA
MEDIA
media_systemE_EN.book Seite 30 Montag, 21. September 2009 1:48 13