Seat Ateca 2018, Руководство пользователя

Страница: 326 / 412

Driving
Key to the Fig. 293 :
Symbol Meaning
A
Front camera area
B
Right camera area
C
Rear camera area
D
Left camera area

Exit the current display.

Three-dimensional views

Depending on the equipment: con-
necting and disconnecting the Park-
Pilot sound.

Adjust the display: bright, contrast
and colour.
The aerial view is generated by combining
the images from all the cameras

›››
Fig. 293 . The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
the different areas
›››
Fig. 293
A
to
D
of the
aerial view or the reduced aerial view.
Conditions necessary for the use of the
Area View system
●
The doors and the rear lid must be closed.
● The image must be reliable and clear. For
this reason, for example, the camera lens
must be clean.
●
The area around the vehicle must be clear-
ly and totally visible.
●
The area for parking or manoeuvring
should be a flat surface.
● The vehicle should not be loaded very
heavily at the rear.
●
The driver must be used to the system.
●
There should be no damage to the vehicle
in the camera area. If the position or installa-
tion angle of the cameras have been
changed, e.g. after a rear-end collision, the
system should be checked by a specialised
workshop.
Camera image view
●
Aerial view (bird's eye view) : to obtain a
panoramic view of the vehicle

, three-di-
mensional views, from different camera posi-
tions.
●
Front camera (front view) : to observe traf-
fic ahead of the vehicle (vehicles crossing)

, for front parallel parking

, when ap-
proaching an obstacle and in off-road driving

.
●
Side cameras (side view) : to view the area
close to the sides of the vehicle, both on the
left

and on the right

, or a combination of
both sides

.
● Rear camera (rear view) : To observe traf-
fic behind the vehicle (vehicles crossing)

,
for reverse perpendicular parking

, for re-
verse parallel parking

and for hitching a
trailer to the vehicle

.
The selected view is displayed on the right
side of the screen. The reduced aerial view
shown on the right side displays the view
framed in yellow. In addition, the right margin
of the screen displays the menu options pos-
sible and the views (the so-called “modes”)
of the camera in question. The active view
(mode) at the time is highlighted.
The reduced aerial view can be hidden by
pressing the

symbol to thus display the se-
lected view full-screen.
Instructions for use
Fig. 294
Centre console: button for activat-
ing/deactivating the Area View system manual-
ly in combination with the parking aid system
(

) or else with the rear ParkPilot system (

).
324