Seat Ateca 2018, Руководство пользователя

Страница: 120 / 412

Operation
WARNING
If messages are ignored, the vehicle may
stall in traffic and cause accidents and se-
vere injuries.
●
Never ignore the messages displayed.
●
Stop the vehicle at the next opportunity
and in a safe place.
Note
In order not to compromise the system's
operation, please take the following points
into account:
●
Regularly clean the area of vision of the
camera and keep it in a clean state, without
snow or ice.
●
Do not cover the field of vision of the
camera.
● Always replace damaged or worn blades
when required to avoid lines on the cam-
era's field of vision.
●
Check that the windscreen is not dam-
aged in the area of the camera's field of vi-
sion.
●
The use of outdated maps on the naviga-
tion system may cause the system to show
traffic signs incorrectly.
● In the waypoints mode of the navigation
system, the traffic sign detection system is
only partly available.
●
Failure to heed the control lamps and
corresponding text messages when they
light up may result in damage to the vehi-
cle.
Time
Setting the time on the infotainment sys-
tem
●
Press the infotainment

button.
●
Press the
SETTINGS
function button.
●
Select the menu option
Date and time
to
set the time
›››
 page 36 .
Setting the time on analogue the instru-
ment panel
●
To set the time (for all vehicle clocks), press
and hold the button
 
on the instrument
panel until the
Time
is displayed.
●
Release the button
 
. The time is dis-
played on the instrument panel display and
the hours field is highlighted.
●
Afterwards, press the button
 
until the
desired time is displayed. To scroll quickly,
hold the button
 
.
●
When they have finished setting the hour,
wait until the minute field is marked on the in-
strument panel display.
●
Afterwards, press the button
 
until the
desired time is displayed. To scroll quickly,
hold the button
 
.
● Release the button
 
in order to finish
setting the time.
Adjusting the time in the SEAT Digital
Cockpit
●
While on the
Driving data
menu select
Range
(Infotainment button

>
View >
Driving data > Range
).
●
Press the button

on the multifunction
steering wheel until the Service menu is dis-
played on the instrument panel display
›››
page 112 .
●
Select the menu
Time
.
●
Adjust the correct time by turning the right
thumbwheel of the multifunction steering
wheel.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
However, it is advisable to change up a gear
or move the selector lever to
D (or lift your
118