Seat Alhambra 2019, Руководство пользователя

Страница: 73 / 380

Instruments and warning/control lamps
Driving data indicator (multifunc-
tion display)
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
In vehicles without a multifunction steering
wheel:
●
Press the rocker switch

on the wiper
lever.
In vehicles with a multifunction steering
wheel:
●
Turn the right thumbwheel of the multifunc-
tion steering wheel
›››
page 84 .
Driving data memories
The multifunction display has two automatic
memories:
Partial memory: The memory collects
journey and consumption data from
when the ignition is turned on until when
it is turned off. The memory is automati-
cally deleted if the journey is interrupted
for more than 2 hours. If the journey is
continued in less than 2 hours after the
ignition is switched off, the new data is
added to the data already stored in the
memory.
1
Total memory: The memory records the
values for a specific number of partial
trips, up to a total of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes, or
1,999.9 km (or miles) for 9,999 km (or
miles), depending on the model of in-
strument panel. On reaching either of
these limits, the memory is automatically
erased and starts to count from 0 again.
The selected memory will be shown in the
upper right-hand corner of the display.
Changing memory
●
With the ignition switched on, and display-
ing memory 1 or 2 , briefly press the

key on the wiper lever or the

on the multi-
function steering wheel to switch from one
memory to the another
Manually erasing memory 1 or 2
●
Select the memory that you wish to erase.
●
Hold the

button on the wiper lever
or the

button on the multi-function steer-
ing wheel down for about 2 seconds.
Possible displays
●
Travelling time: This indicates the hours (h)
and minutes (min) since the ignition was
switched on.
●
Current fuel consumption: The current
fuel consumption while driving is displayed in
2 l/100 km (or miles per gallon, mpg); when the
engine is running but the vehicle is not mov-
ing, in l/h (or gallons per hour).
●
Average consumption: When the ignition
is switched on, the average consumption (in
l/100 km or in mpg) is displayed after the ve-
hicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are dis-
played. The value shown is updated approxi-
mately every 5 seconds.
●
Range: Approximate distance in km (or
miles) that can still be travelled with the fuel
remaining in the tank, assuming the same
style of driving is maintained. This is calcula-
ted using the current fuel consumption.
●
Distance travelled: Distance travelled, af-
ter ignition is switched on, in km (or miles).
●
Average speed: After the ignition is switch-
ed on, the average speed will be shown after
a distance of approximately 100 metres (328
feet) has been travelled. Otherwise horizontal
lines are displayed. The value shown is upda-
ted approximately every 5 seconds.
●
Digital speed display: Current speed dis-
played digitally.
●
Digital oil temperature display: Updated
engine oil temperature digital display
●
Speed warning at --- km/h: If the stored
speed is exceeded (between 30 - 250 km/h,
or 18 - 155 mph), an audible warning is given
together with a visual warning.
»
71