Seat Alhambra 2019, Руководство пользователя, Страница: 275 / 380

Driver assistance systems
speed has not been reached or because
the lane lines are not recognised.
Fig. 257

: The system is active and
available, both lane lines are recognised.
The steering angle is not being correc-
ted at this moment.
›››
Fig. 257

: The system is operational,
the highlighted line
1
indicates that
there was a risk of involuntarily crossing
the lane line and that the steering is be-
ing adjusted to correct the angle.
Operating mode
Steering wheel vibration
The following situations can cause vibration
in the steering wheel and require the driver to
take active control of driving:
●
When the steering angle assist value re-
quired to keep the vehicle in the lane is higher
than the system’s maximum operating value.
●
If the system ceases to display the lane
lines while assisting with steering.
Switching the Lane Assist system on or off
●
Select the corresponding menu option us-
ing the button for the driver assistance sys-
tems
›››
page 84 .
●
OR: using the instrument panel menu
Set-
tings > Assistants > Lane Assist
–
–
›››
page 70 . The “confirmation sign” indicates
that the driver assist system is switched on.
Automatic deactivation: the lane assist sys-
tem can be deactivated automatically if
there is a system malfunction. Control lamp
switches off.
The lane assist system is active but it is not
available (the control lamp is lit up yellow)
●
When driving at speeds below 65 km/h (38
mph).
●
When the Lane Assist system does not de-
tect the dividing lines of the road. For exam-
ple, in the event warnings indicating road
works, and snow, dirt, moisture or reflections.
● When the radius of a curve is too small.
●
When no road markings can be seen.
●
When the distance to the next marking to
too great.
●
When the system does not detect any clear
and active steering movement during a long
period of time.
●
Temporarily, in the event of very dynamic
driving styles.
●
If a turn signal is activated.
●
When the ASR is switched off.
BSD Plus (Lane Assist with Blind Spot As-
sist)*
The BSD Plus function is achieved by activat-
ing the Lane Assist and BSD functions
›››
page 274 . In this case, the Lane Assist
function expands its functions in the following
way:
If the driver tries to change lane and there is a
vehicle in the blind spot:
●
The

lamp flashes in the corresponding
rear-view mirror even though the turn signal
has not been activated.
●
The steering wheel vibrates to warn the
driver of the risk of collision.
●
torque is applied to correct the steering
and return the vehicle to its lane.
Switching off the Lane Assist system in the
following situations
Due to the limits of the Lane Assist system,
switch it off in the following situations:
●
When more attention is required of the driv-
er
●
When driving in a sporty style
●
In unfavourable weather conditions
●
On roads in poor condition
●
In areas of road works
»
273