Quick Reference Guide
7
To confirm an entry or a selection (marked), press the menu button.
For further information
page 8, “Sound, sound focus and volume”.
System adjustments, sound and volume
System settings
The adjustment menu may be used to change the menus
language, the measurement units and the time as well as to
restore factory settings.
Push the button
and then the function button
.
Display adjustments:
On all of the ADJUST menus, display adjustments may be made using the
following function buttons:
– Access to a menu allowing adjustment of the screen brightness.
– To turn the screen off. To turn the screen on again, press the func-
tion button or any other.
System settings:
1)
Menus language
– Select the language of display and audio instructions.
Measurement units
– Select distance measurements in Kilometers or Miles.
Adjust the time
– To manually adjust the time (normally that from the vehicle
is used).
Predefined settings
– Select from a list, the adjustments that should return
to factory settings. Press the option
Reset
and once again confirm your selec-
tion. Note that all recorded information will be lost by using this option.
1)
Some adjustments may not be available in certain situations
SETUP
ADJUST
BRIGHT
DISP. OFF
Radionaveg300_angles Seite 7 Donnerstag, 13. Oktober 2005 11:48 11
