INSTALLATION INSTRUCTIONS
Copy Par t# 767628, Rev. I, 12/2013
Page 1 of 2
© 1999 Marine Canada Acquisition Inc. DBA SEASTAR SOLUTIONS 3831 No. 6 Road, Richmond, B.C. Canada V6V 1P6
Fax: 604.270.7172
Web:
www.seastarsolutions.com
1
766815
1
Mounting Bezel
2
185624
4
Carriage Bolts 1/4” x 3-1/2”
3
766723
1
Rubber Seal
4
067528
8
Washer 1/4” Flat
ITEM
PART#
QTY
DESCRIPTION
3
4
HELM PUMP
• Drill mounting holes and provision for helm using the template
on page 2.
• Assemble the mounting bezel (item 1) with the carriage bolts
(item 2) and the rubber seal (item 3) according to the diagram.
• Secure the assembly to the mounting sur face using the washers
(item 4) and the nuts (item 5). Torque to 75in-Ib (8.67Nm).
• Inser t the helm pump from behind the dash through the hole in the
mounting sur face and secure using the mounting plate (item 6)
and remaining nuts (item 5). Torque to 75in-Ib (8.67Nm).
2
1
6
5
DASH
5
*5
067424
8
Locking Nut 1/4” NC
6
764233
1
Anchor Plate
ITEM
PART#
QTY
DESCRIPTION
4
MOUNTING KIT #HA5417
Standard Helm – Round Bezel Back Mount
Item 5:
Torque to
75in-lb (8.67Nm).
NOTICE
*
*
*
Figure A.
For helm pumps produced
after
October 2008
use Mounting Kit
Par t # HA5478.
NOTICE
