Sears craftsman 315.101390, Руководство по справочнику

Страница: 5 / 16

Page 5
LOCK-ON
BUTTON
OPERATION
Fig. 1
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating your hammer drill. Failure to do so
could result in dust, shavings, loose particles or foreign
objects being thrown into your eyes, causing possible
serious injury.
KNOW YOUR HAMMER DRILL
Before attempting to use your hammer drill, familiarize
yourself with all operating features and safety requirements.
See Figure 1.
WARNING:
If any parts are missing, do not operate your hammer drill
until the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
ELECTRICAL CONNECTION
Your hammer drill has a precision built electric motor. It
should be connected to a power supply that is 120 volts,
60 Hz, AC only (normal household current). Do not
operate this tool on direct current (DC). A voltage drop of
more than 10 percent will cause a loss of power and the
motor will overheat. If your tool does not operate when
plugged into an outlet, double-check the power supply.
WARNING:
Do not allow familiarity with your hammer drill to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict severe injury.
TO REMOVE
TO STORE
CHUCK KEY
STORAGE AREA
CHUCK
KEY
CHUCK
VARIABLE SPEED
CONTROL SELECTOR
DEPTH
GAGE ROD
AUXILIARY
HANDLE
SWITCH
TRIGGER
DEPTH
GAGE CLAMP