background image

PETROL ENGINE COMPRESSION TESTER KIT

Model no:

 VSE300D

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SafETy

 

‰

  

WaRNING!

 ensure all Health and Safety, local authority and general workshop practice regulations are adhered to when using these  

 tools.

 

8

  

DO NOT

 use tools if seals or threads are damaged. Any defective seal 

MUST

 be changed before use to avoid incorrect readings.

 

9

   Maintain the tools in a good, clean condition for best and safest performance.

 

9

   ensure that a vehicle that has been jacked up is adequately supported with axle stands.

 

9

   Wear approved eye protection. A full range of personal safety equipment is available from your Sealey Stockist.

 

9

   Wear suitable clothing to avoid snagging, tie back long hair and 

DO NOT

 wear jewellery.

 

9

   ensure any disconnected fuel pipes are plugged to avoid spillage.

 

9

   ensure that the correct connector is used for the engine/vehicle being tested.

 

9

   Always release the pressure from the gauge before disconnecting the quick release coupling.

 

9

   Account for all tools, and parts being used and 

DO NOT

 leave them in or near the engine.

 

‰

  

WaRNING!

 Select neutral (or ‘park’ if automatic transmission) and keep hands clear of the engine as engine rotation may occur    

  when using these tools. The ignition 

MUST BE

 turned off, and only switched on when instructed to do so.

 

‰

  

IMPORTaNT:

 

Always refer to the vehicle manufacturer’s service instructions, or a proprietary manual, to establish the current procedure and  

 data. 

 

‰

   These instructions are provided as a guide only.

 

9

   When not in use, return all parts to the protective case and store this in a safe, dry, childproof location.

 

‰

  

WaRNING!

 

The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations that  

  may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be    

  applied by the operator.

2.  INTRODUCTION

 

Features 300psi gauge with large rubber bumper. Includes extension for deep seated plugs and flexible extension hose. Suitable for  

 

petrol engines with 10, 12, 14 and 18mm spark plug threads. Supplied in carry-case.

   fig.1

VSe300d Issue 2 (HF) 12/10/18

Original Language Version

© Jack Sealey limited

Refer to 

instructions

 Wear eye 

protection

Отзывы: