background image

INSTRUCTIONS FOR: 

 

fuel INJECTION PRESSURE TEST set - 

test port 

 

MODEL No:   

Vse211.V3

  1.  sAfetY INstruCtIoNs

 IMPORTANT: 

Always refer to the vehicle manufacturer’s    

 

service instructions, or proprietary manual to establish the   

 

current procedure and data.These instructions are  

 

 

provided as a guide only.

 

WArNING!

 

ensure all Health and safety, local authority,  

 

and general workshop practice regulations are strictly  

 

adhered to when using product.

 

Maintain

 

tools in good and clean condition for best and  

 

 

safest performance.

 

Do Not

 use test kit if damaged.

 

 

 

Account for all tools and parts being used and do not leave  

 

them in, or on the engine after use.

 

Ensure you have read and understood the safety aspects of  

 

dealing with the fuel injection system and petrol in general  

 

before commencing.

 

  

 

  

 

fuel Hazards:

 

WArNING! 

Petrol fumes and battery gases are explosive.

 

Do Not

 smoke or allow an open flame or sparks in the    

 

work area.

  Keep a dry chemical (class B) fire extinguisher near to the  

 

working area.

  Avoid fire hazard by using caution when disconnecting fuel    

 

lines and installing adaptors - some spillage is inevitable.

  When connecting to or disconnecting from a fuel system,    

 

relieve pressure from system and wrap a cloth around the   

 

fuel line fitting to absorb any fuel leakage. Wipe up fuel    

 

spills immediately.

     fuel leaks

  Constantly check gauge and adaptor connections for  

 

 

leakage. If you see leakage turn off the ignition or disable   

 

the fuel pump, relieve fuel pressure if necessary and correct  

 

leaks before continuing.

 

Do Not

 let fuel drip or spill onto a hot engine.

  Wipe up fuel spills immediately.

  When using tee adaptors, secure hose with hose clamps to  

 

ensure leak-free connections.

  Check all adaptor sealing washers and 'O' rings are in good  

 

condition before use.

 

Do Not

 allow fuel to remain in the adaptors or hoses after  

 

use.  

 

personal / operation

 

Wear approved eye protection. A full range of personal    

 

safety equipment is available from your Sealey dealer.

  Keep yourself, clothing and test equipment away from all    

 

moving or hot engine parts.

 

Do not wear jewellery and tie back long hair.

  Before performing a test with the engine running (unless    

 

the manufacturer's manual states otherwise), set the  

 

 

parking brake and place the gear selector in neutral or    

 

park, and block the drive wheels.

  Exhaust gas contains deadly poisonous gases. The test    

 

area must be well ventilated - route the exhaust gas  

 

 outdoors.

  Before repairing the fuel system, turn off the ignition switch  

 

and disconnect the battery per manufacturer's procedure.

  Never disconnect the battery whilst the engine is  running.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 

pleAse reAD tHese INstruCtIoNs CArefullY. Note tHe sAfe operAtIoNAl reQuIreMeNts, WArNINGs AND CAutIoNs. 

use tHe proDuCt CorreCtlY AND WItH CAre for tHe purpose for WHICH It Is INteNDeD. fAIlure to Do so MAY CAuse DAMAGe 

AND/or persoNAl INJurY AND WIll INVAlIDAte tHe WArrANtY. pleAse Keep INstruCtIoNs sAfe for future use.

 

WArNING! Do Not use this kit or the components from this kit on diesel fuel systems or high pressure petrol injection systems 

 

(in excess of 145psi). ensure you have read and understood the safety aspects of dealing with the fuel injection system and petrol in    

 

general before commencing.

Original Language Version

VSE211.V3    Issue 1 - 01/03/13

 2.  INtroDuCtIoN 

Comprehensive kit of adaptors and fittings for modern Schrader 

test port fuel injection systems. Components fitted with quick 

coupling system and safety valve to prevent inadvertent discharge 

of fuel under pressure. Kit supplied with large high pressure 

gauge reading 0-145psi and 0-1000kPa. Gauge has hanging 

hook and protective bumper. Pressure release valve fitted with 

long drain hose allows safe recovery of fuel. 

Supplied in carry-case. 

© Jack Sealey Limited

Отзывы: