background image

InstructIons For: 

air conditioning leak detection kit

model no:

 VS600.V2

 1.  Safety

 3.  Specification

 4.  contentS

 2.  introduction

 Vs600.V2     Issue: 1 - 08/12/15

Original Language Version

 © Jack sealey limited

Model no:  . . . . . . . . . . . . . . . . . VS600.V2

temperature:. . . . . . . . . . . . . .10°c to 45°c 

Humidity:. . . . . . . . . . . . . . . . . . . 20 to 90%

lamp type:. . . . . . . . . . . dichroic uV lamp

Power rating:. . . . . . . . . . . . . . . . . . . 50W

Power supply:  . . . . . . . . . . . . . . . . 12V dc

supply cable length:. . . . . . . . . . .3metres

refer to the 

instruction

 manual

Wear eye 

protection

Wear 

respiratory 

protection

Wear

protective 

gloves

Wear protective 

clothing

 

Warning! 

ensure that Health and safety, local authority and general workshop practice regulations are adhered to when using this   

 

air conditioning leak detection kit.

 

Warning! 

the leak detection fluid is an irritant if it contacts skin or eyes. A safety data sheet covering the leak detection fluid  

 

 

Vs60012 and Vs60033 is obtainable via your local sealey dealer.  

 

do not 

use this kit if damaged, leaking at connections or hose and if you are not wearing the protection shown above. A full range of  

 

safety PPe is available from your local sealey dealer. 

 

Warning! do not look into the uV lamp, even if wearing the uV goggles.

 

do not point the uV lamp at yourself, other people or animals.

 

maintain the items in the kit in good and clean condition for best and safest performance.

 

Account for all kit items during use and 

do not 

place any on or near the engine.

 

on completion of the work, replace all the kit items back in the carry case and store in a cool, dry, childproof area. 

  

Warning! the warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that   

 

may occur. it must be understood by the operator that common sense and caution are factors which cannot be built into    

 

this product, but must be applied by the operator.

IMPORTANT: 

These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions, or a proprietary

 

manual to establish the current procedure and data. 

Find leaking hoses and joints in vehicle r134A air conditioning systems fast. supplied with rugged 12V ultraviolet lamp and dye injector system 

for use in conjunction with any air conditioning recharge/recycle station. Includes ten single doses of fluorescing dye and UV enhancing 

spectacles for use in normal workshop lighting conditions. supplied with hose adaptors, comprehensive operating instructions and carry-case.

 Item 

descrIPtIon

  1 

12V uV lamp/cable/battery clips

  2 

reservoir/injector valve

  3 

rotating connector 6/4

  4 

rotating connector 4/6

  5 

uV dye (x10)

  6 

uV Goggles

   

fig.1

IMPORTANT:

 

pleaSe read tHeSe inStructionS carefully. note tHe Safe operational reQuireMentS, WarningS & cautionS. uSe tHe product 

correctly and WitH care for tHe purpoSe for WHicH it iS intended. failure to do So May cauSe daMage and/or perSonal inJury and Will 

inValidate tHe Warranty. keep tHeSe inStructionS Safe for future uSe.

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

Отзывы: